Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)

28" Colorado DOT Handicap with Border Stencil

$112.00
SKU 108-5CO19

28" DOT Handicap Stencil SKU: 1800-5CO19

The 28 inch DOT Handicap stencil is perfect for painting the handicap symbol and the border at the same time to insure that the two things are square to each other. A 28" DOT Handicap is on the smaller side of industry standards, but is still an acceptable size for a handicap parking stall. This 28 inch Colorado DOT Handicap is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Colorado DOT Specifications (pg-1)

Other Colorado Stencils


Specifications

Stencil Width 25"
Stencil Height 28"
Material Width 48"
Material Height 48"
Border Width 42"
Border Height 42"
Availability Usually Ships in 1-2 days or sooner*

 

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

108-5CO19 116-5CO19 080-5CO19 025-5CO19

 

Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.