Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
28" Montana DOT Handicap with Border Stencil

28" Montana DOT Handicap with Border Stencil

$108.00
SKU 108-5MT21

28" Montana DOT Handicap with Border Stencil SKU: 1800-5MT21

The 28 inch Montana DOT Handicap stencil is perfect for painting the handicap symbol and the border at the same time to insure that the two things are square to each other. A 28" Montana DOT Handicap is on the smaller side of industry standards, but is still an acceptable size for a handicap parking stall. This 28 inch Montana DOT Handicap is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

    (Missouri DOT Specification (620-20)

    Other Missouri Stencils

    Specifications

    Stencil Width 24"
    Stencil Height 28"
    Material Width 47"
    Material Height 47"
    Border Width 40"
    Border Height 40"
    Availability Usually Ships in 1-2 days or sooner*

     

    Country of origin: USA

    Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

    Other Part Numbers

    108-5MT21 116-5MT21 080-5MT21 025-5MT21

     

    Selecting a Stencil Grade:

    • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
    • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
    • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
    • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.

    Related products