36" California DOT Handicap with Border Stencil
36" California DOT Handicap with Border Stencil SKU: 1800-5CA11
The 36 inch California DOT Handicap with Border stencil is perfect for painting the handicap symbol and the border at the same time to insure that the two things are square to each other. A 36" California DOT Handicap is on the smaller side of industry standards, but is still an acceptable size for a handicap parking stall. This 36 inch California DOT Handicap is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.
Specifications
| Stencil Width | 36" |
| Stencil Height | 32" |
| Material Width | 60" |
| Material Height | 60" |
| Border Width | 53" |
| Border Height | 53" |
| Availability | Usually Ships in 1-2 days or sooner* |
Country of origin: USA
Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.
Other Part Numbers
108-5CA11 116-5CA11 080-5CA11 025-5CA11
Selecting a Stencil Grade:
- 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
- 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
- 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
- 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.
