Skip to content
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
Free UPS Ground shipping on all orders $50+ to Contiguous US - (non-aluminum)
6"x4' Virginia DOT Line Stencil

6"x4' Virginia DOT Line Stencil

$22.00
SKU 108-5VA02

6"x4' Virginia DOT Line Stencil SKU: 5VA02

The 6 inch by 4 feet Virginia DOT line stencil can be used for a background of 4" and 6" wording, and blacking out old stencils. This 6" x 4' Virginia DOT can also be used for the hard to paint areas that a striping machine won't fit in. A person can paint up to 5 lines with this stencil before it needs to be set aside to dry and then cleaned before it is ready for more use. The stencil is made specifically to meet the specifications for the Department of Transportation's Manual on Uniform Traffic Control Devices or MUTCD. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

(Virginia DOT Specifications (704)

Other Virginia Stencil

Specifications

Material Width 18"
Material Length 60"
Line Width 6"
Line Length 48" (4')
Availability Usually Ships in 1-2 days or sooner*

 

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

108-5VA02 116-5VA02 080-5VA02 025-5VA02

 

Selecting a Stencil Grade:

  • 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
  • 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
  • 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
  • 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.

Related products